Covidien Valleylab Force FX-C

Valleylab Force FX-C Electrosurgical Unit

• Fully Refurbished
• Optional Cart Available
• Hand & Foot Controls

Description

The Equipped MD Difference.

At Equipped MD we guarantee the best possible pricing on all Medtronic / Valleylab products. We will meet or beat any competitors quote, and offer our “wholesale direct” pricing right out of the gate. This allows us to offer you exceptional value, and custom tailor the pricing to your needs & budget. To learn the details and get in-depth pricing simply hit the request a quote button above or simply give us a call.

REM™ Contact Quality Monitoring System

• Measurement Frequency: 80 kHz ± 10 kHz
• Measurement Current: Less than 10 µA
• Acceptable Resistance Ranges: –REM™ pad – 5-135 ohms –Non-REM™ pad – less than 20 ohms
• Acceptance range is 5-135 ohms after REM PolyHesive II return electrode is applied.

Adaptive REM™

• REM™ trip is baseline impedance plus 40%. For example, if the baseline impedance is 30 ohms, the upper level trip approximately 42 ohms. If the pad-patient impedance falls below the baseline impedance, a new baseline is established.

Output Characteristics Bipolar

• Precise Mode:
  – Maximum P-P Voltage: 450
  – Rated Load (OHMS): 100
  – Maximum Power (Watts): 70
  – Crest Factor* (Typical): 1.5
• Standard Mode:
  – Maximum P-P Voltage: 320
  – Rated Load (OHMS): 100
  – Maximum Power (Watts): 70
  – Crest Factor* (Typical): 1.5
• Macro Mode:
  – Maximum P-P Voltage: 750
  – Rated Load (OHMS): 100
  – Maximum Power (Watts): 70
  – Crest Factor* (Typical): 1.5

Monopolar Coag

• Desiccate Mode:
  – Maximum P-P Voltage: 3500
  – Rated Load (OHMS): 500
  – Maximum Power (Watts): 120
  – Crest Factor* (Typical): 5
• High Crest Factor* Mode:
  – Maximum P-P Voltage: 8500
  – Rated Load (OHMS): 500
  – Maximum Power (Watts): 120
  – Crest Factor* (Typical): 7.0
• Low Crest Factor *Mode:
  – Maximum P-P Voltage: 6900
  – Rated Load (OHMS): 500
  – Maximum Power (Watts): 120
  – Crest Factor* (Typical): 5.5
• Spray Mode:
  – Maximum P-P Voltage: 9000
  – Rated Load (OHMS): 500
  – Maximum Power (Watts): 120
  – Crest Factor* (Typical): 8

CEM™ Mode

• Monopolar Cut (Low):
  – Maximum P-P Voltage: 1000
  – Rated Load (OHMS): 300
  – Maximum Power (Watts): 100
  – Crest Factor* (Typical): 1.5

Monopolar Coag (Dessicate):

• Maximum P-P Voltage: 3500
  – Rated Load (OHMS): 500
  – Maximum Power (Watts): 70
  – Crest Factor* (Typical): 5 * Crest Factor is an indicator of a waveform’s ability to coagulate without cutting